DC 1,500E, Portable Electric Dust Collector One (1) Month Minimum Rental Period
This 1,500 cfm dust collector is designed to provide the contractor a unit for tight spaces. Caster mounted with forklift tubes as well, the compact unit can easily be positioned in an optimum location. The compact size allows it to be pushed through halls and doorways and transported on cargo elevators, reaching positions inside structures that otherwise would require long duct lengths. One (1) 6” duct connection makes connecting vent hose quick. Envelope filters collect the dust particles and are cleaned with a manual shaker. The dust particles then fall into the dust drawer below that can be emptied by pulling it out. The fan is direct driven by a 3 HP motor. The unit is supplied with 25’ of the properly sized SO cord to allow electrical connection at the job site. One large, easy to open and close door gives quick access to the filters and dust drawer. Dust Collector Spare Parts
Specifications: Manufacturer: SAFE Systems, Inc. Length 30” Width 3’-4” Height 5’-10” Weight 400# (New filters and dust hopper completely empty of dust) Horsepower 3 Voltage 480 VAC, 3 phase Full load Amps 5 Features: Caster mounted. Forklift pockets. Fan and dust collector rated for 1,500 CFM @ 8” W.C. Two (2) dust inlets, 6” diameter, only one to be used at a time Air requirements for pulse cleaning system, 20 CFM @ 90 to 100 PSIG. Fan is direct driven by a 3 HP, 480-volt, 3-phase electric motor. 480 volt AC, 3 phase controls for fan motor. Dust discharges into removable dust box. 25’ of properly sized SO cord for electrical hook-up. Envelope style filters Notes: 1. Not intended to be shipped with any dust in the dust box. 2. Recommend emptying dust every 2 to 4 hours depending on collection rate. 3. It is recommended that a qualified electrician connect this equipment to power. 4. Insure fan is turning the correct direction after connecting to power.