DC 3,000-E, Skid Mounted Dust Collector

COMING SOON

Manufacturer:  SAFE Systems, Inc.

Length Length Width Height Height Weight Horsepower Voltage Full load Amps

5’-9”   (Working position) 10’-4” (Shipping position) 4’-8”   (Working and shipping position) 5’-9”   (Shipping position) 10’-4” (Working position) 1,700 lbs.   (New filters and dust hopper completely empty of dust) 10 460 VAC 11.3

Features:
           Skid mounted.
           Fixed position legs.
           Forklift pockets.
           Certified lifting eyes for handling by overhead crane.
           Fan and dust collector rated for 3,000 CFM @ 12” W.C.
           One (1) dust inlet, 12” diameter.
           Automatic reverse pulse cleaning system for filters.
           ¾” air piping for pulse cleaning system.
           Air requirements for pulse cleaning system, 20 CFM @ 90 to 100 PSIG.
           Fan is direct driven by a 10 HP, 460-volt, 3-phase electric motor.
           460 volt AC, 3 phase controls for fan motor.
           120 volt AC, 1 phase controls for pulse cleaning system.
           Four (4) cartridge filters.
           Adjustable outlet damper on the fan for regulating the airflow.
           Dust discharges into removable dust box.
           25’ of properly sized SO cord for electrical hook-up.

Notes:
1.      Not intended to be shipped with any dust in collection hopper.
2.      Recommend emptying dust every 2 to 4 hours depending on collection rate.
3.      It is recommended that a qualified electrician connect this equipment to power.
4.      Insure fan is turning the correct direction after connecting to power.
5.      It is recommended that all new filters be coated with precoat dust prior to putting into service.

Phone: (425) 251-8545     18420 68th Ave S., Suite 202, Kent, WA 98032     Fax: (866) 607-8759
Sales: (206) 898-9159