MSV 2-15-2, Blast and Recovery System

Manufacturer:  SAFE Systems, Inc.

Skid #1 (hopper and blast machine)		Skid #2 (Dust collectors and rotary separator)
Length Height Width Length Height Width Weight Voltage Full load Amps	17’-3” (Shipping position) 5’-11” (Shipping position) 6’-5” 6’-1” (Working position) 17’-3” (Working position) 6’-5” 7,000 lbs. (Empty of abrasive) 120 VAC 20 Amps	Length Width Height Weight	9' 8'-6" 11'-2" 4,800 lbs.
Air required Air required	330 CFM @ 125 PSIG (per blast outlet) 800 CFM @ 125 PSIG (if using induction vacuum)

Features:
           Skid mounted.
           Forklift pockets.
           Certified lifting eyes for handling by overhead crane.
           Two (2) vacuum dust collectors.
           Eight (8) cartridge filters (part #10001245).
           Automatic reverse pulse cleaning system for filters.
           ¾” air piping for pulse cleaning system.
           Two (2) abrasive classification stations. Both classifiers are adjustable.
           Air requirements for pulse cleaning system, 18 CFM @ 90 to 100 PSIG.
           800 CFM air induction vacuum system.
           Two-outlet blast machine.
           1-1/2” air piping.
           120 volt AC, 1 phase, control systems.
           15 tons of abrasive capacity (steel grit).
           Dust and trash discharges in standard 55 gallon drum (drum supplied by customer).
           System can be used with alternate vacuum system(s).

Notes:
1.      Not intended to be shipped with any abrasive or dust/trash in the system.
2.      Recommend emptying dust and trash every 2 to 4 hours depending on collection rate.
3.      It is recommended that a qualified electrician connect this equipment to power.
4.      It is recommended that all new filters be coated with precoat dust prior to putting into service.
5.      Skid #1 must be shipped in horizontal position and stood up with crane at the job site.
6.      System is shipped as two separate skids. They must be connected together at job site.

Phone: (425) 251-8545     18420 68th Ave S., Suite 202, Kent, WA 98032     Fax: (866) 607-8759
Sales: (206) 898-9159