AD 1,200 Desiccant Compressed Air Dryer One (1) Month Minimum Rental Period
The AD 1200 is a compact, skid mounted, deliquescent air dryer that will fit into places our other air dryers can't go. The radiator is mounted on top of this unit creating a smaller footprint. With a drying capacity of approximately 1,200 CFM of air at 100 PSIG, this unit is ideal for drying air for abrasive blasting operations, accommodating 3-4 blasters, depending on nozzle size. The air powered heat exchanger (air to air) needs only 70 cfm of compressed air to operate. The ASME certified tank is rated at 200 psi and holds approximately 750# of desiccant tablets which remove the moisture from the air. Mounted on a sturdy protective frame with fork lift tubes and certified lifting eyes, the air dryer can be moved into position with either a fork lift or overhead crane. The 2-1/2” inlet and 3" outlet piping system has a particulate filter to trap solid particles and is large enough to reduce pressure loss in the piping. An air motor enables the system to operate totally without electrical power when using the manual moisture drain valve. If 120 Volt AC power is available, the automatic drain system can be used. Air Dryer Spare Parts
Specifications: Length 5’-0” Height 7’-4" Width 2’-9” Weight 2,300 lbs. (Full of desiccant) Voltage 120 VAC (not needed if manual drains are used) Compressed Air 70 CFM for the air motor Features: Skid mounted. Structural steel frame protects equipment. Forklift pockets. Certified lifting eyes (4 each) for handling by overhead crane. AIR to AIR Heat Exchanger Air powered fan motor for air to air heat Exchanger. Filter-regulator-lubricator provided for air motor. Desiccant tank is ASME rated @ 200 PSI. System is rated for 1,200 SCFM @ 100 PSI. 180° F 2-1/2” inlet air piping 3” outlet air piping Sight glass in desiccant tank for visual inspection of desiccant level. Manual and electric moisture drains on the desiccant tank and after filter. Notes: 1. Not intended to be laid on its side. 2. Air (bull) hoses and fittings not provided for connection of equipment. 3. Additional charges may apply for desiccant used during the rental period. 4. Not intended to be used with air compressors with high levels of oil in the air discharge.