DC 14,000E, Portable Electric  Dust Collector
One (1) Month Minimum Rental Period

A compact and versatile dust collector, the SAFE Systems DC14,000E is powered by a belt-driven 50HP electric motor with a wye-delta starting system.
The fan and dust collector are rated at 14,000 cfm @ 20” WC. An inlet damper is provided to regulate the airflow.
The trailer-mounted 14,000 cfm dust collector is “highway legal” with pintle hitch, dual 7,000# axles, electric brakes and the required lights. It has lifting eyes for handling by crane and can be loaded on a double-drop semi-trailer, if needed.  A large, container-style door makes filter access easy.
The unit has two (2) 18” diameter dust inlets on each of two sides to give the user greater versatility.  Only two inlets are to be used at a time.  The dust collector utilizes eighteen (18) filter cartridges which are cleaned by an automatic pulsing system. Dust then falls into the hopper where an auger system makes it easy to remove it into a standard 55 gallon drum.  30cfm of compressed air is required for the pulsing system.
Dust Collector Spare Parts

Specifications:
​Manufacturer:  SAFE Systems, Inc.
Length
Width                               21’-4”
Height                              8’-2”
Empty weight                   11’-4-3/4”
Outfitted weight               9,000 lbs. (No filters, hopper empty, fuel tank empty)
Pintle hitch height            11,650 lbs. (New filters, hopper empty, fuel tank full)   
Filters                               22” to 26”
Horsepower                       18
Voltage                             50 460 VAC 3 phase
Full load Amps                  58.9
Features: 
           Licensed, highway legal trailer. 
           Dual 7,000 lb axles. 
           Electric brakes. 
           Fan and dust collector rated for 14,000 CFM @ 20” W.C. 
           Four (4) dust inlets, 18” diameter, only two (2) to be used at a time.
           Automatic reverse pulse cleaning system for filters. 
           ¾” air piping for pulse cleaning system. 
           Air requirements for pulse cleaning system, 30 CFM @ 90 to 100                      PSIG. 
           Driven by a 50 HP electric motor w/ wye-delta start system 
           25’ of #6, 4 conductor SO cord for connecting to jobsite power 
           12 VDC control box. 
           Eighteen (18) cartridge filters, part #1000 0300 
           “On-board” flexible duct hose storage (up to 100 feet). 
           Adjustable inlet damper on the fan for regulating the airflow. 
           Secure (lockable) engine and fuel tank compartment. 
           Ratchet take-up for easy belt tensioning. 
           Dual speed hand crank for auger to remove dust from collection hopper. 
           Dust discharges in standard 55 gallon drum (drum supplied by                          customer). 
           “On-board” lockable toolbox.
Notes: 
1.       Not intended to be towed with any dust in collection hopper. 
2.       Recommend emptying dust every 2 to 4 hours depending on collection               rate. 
3.       It is recommended that all new filters be coated with pre-coat dust prior             to putting into service. 
4.       Tow vehicle must be of sufficient size and weight to safely and legally               tow the machine. 
5.       Tow vehicle must be equipped with a pintle style hitch. 
6.       Tow vehicle must be wired for towing. (Customer to provide matching                 plug and receptacle for the tow lighting.) 
7.       If operating this equipment using a generator, check with the generator               provider to ensure proper sizing.We recommend at least a 110 KW                     generator for this piece of equipment.
8.       Have a qualified electrician hook up to proper power source and verify               correct motor rotation.