AD 800, Desiccant Compressed Air Dryer One (1) Month Minimum Rental Period
The AD 800 is a skid mounted deliquescent air dryer with a drying capacity of approximately 800 CFM of air at 100 PSIG. This unit is ideal for drying air for abrasive blasting operations, accommodating 2-3 blasters, depending on the nozzle size being used. The contractor will use the compressed air powered turbo after cooler (air to air) heat exchanger. Desiccant tablets remove the moisture from the air.mounted on a sturdy protective frame with fork lift tubes and certified lifting eyes, the air dryer can be moved into position with either a fork lift or overhead crane. The 2-1/2” piping system has a particulate filter to trap solid particles, is large enough to reduce pressure loss in the piping and also allows by-passing the drying system for service without interrupting air service to the equipment upstream. An air motor enables the system to operate totally without electrical power when using the manual moisture drain valve. If 120 Volt AC power is available, the automatic spit valve drain system can be used. Air Dryer Spare Parts
Specifications: Length 4’-6” Height 6’-11 3/4" Width 2’-9” Weight 1525 lbs. (Full of desiccant) Voltage 120 VAC (not needed if manual drains are used) Compressed Air 21 scfm for air motor Features: Skid mounted. Structural steel frame protects equipment. Forklift pockets. Certified lifting eyes (4 each) for handling by overhead crane. AIR to AIR Heat Exchanger Air powered fan motor for air to air heat exchanger. Filter-regulator-lubricator provided for air motor. Desiccant tank is ASME rated @ 200 PSI. 2-1/2” inlet air piping 2-1/2” outlet air piping Sight glass in desiccant tank for visual inspection of desiccant level. Manual and electric moisture drains on the desiccant tank and after filter. Notes: 1. Not intended to be laid on its side. 2. Air (bull) hoses and fittings not provided for connection of equipment. 3. Additional charges apply for desiccant used during the rental period determined after return. 4. Not intended to be used with air compressors with high levels of oil in the air discharge.