DC 1,700E, Portable Electric Dust Collector
​One (1) Month Minimum Rental Period

​This 1,700 cfm dust collector is designed to provide the contractor a unit for tight spaces. Skid mounted with forklift tubes as well, the compact unit can easily be positioned in an optimum location.  The compact size allows it to be placed in locations that otherwise would require long duct lengths. 
One (1) 6” duct connection makes connecting vent hose quick.  Cartridge filters collect the dust particles and are cleaned with a compressed air pulse system.  The dust particles then fall into the dust hopper below that can be emptied by opening a slide gate.
The fan is direct driven by a 3 HP motor.  The unit is supplied with 25’ of the properly sized SO cord to allow electrical connection at the job site. One large, easy to open and close door gives quick access to the filters and dust hopper.
Dust Collector Spare Parts

---

Specifications:
Manufacturer:  SAFE Systems, Inc.
Length                                      30”
Width                                       3’-4”
Height                                      5’-10” 
Weight                                     600#  (New filters and dust hopper completely empty of dust)
Horsepower                            3
Voltage                                     480 VAC, 3 phase
Full load Amps                        5
 Features:
            Caster mounted.
            Forklift pockets.
            Fan and dust collector rated for 1,500 CFM @ 8” W.C.
            One (1) dust inlets, 6” diameter
            Air requirements for pulse cleaning system, 20 CFM @ 90 to 100 PSIG.
            Fan is direct driven by a 3 HP, 480-volt, 3-phase electric motor.
            480 volt AC, 3 phase controls for fan motor.
            Dust discharges into pyramidal dust hopper with slide gate.
            25’ of properly sized SO cord for electrical hook-up.
            Cartridge style filters
 Notes:
1.      Not intended to be shipped with any dust in the hopper.
2.      Recommend emptying dust every 2 to 4 hours depending on collection rate.
3.      It is recommended that a qualified electrician connect this equipment to power.
4.      Insure fan is turning the correct direction after connecting to power.