DC 9,500E, Skid Mounted Dust Collector One (1) Month Minimum Rental Period
A compact, versatile dust collector, the SAFE Systems DC9,500E is powered by a belt-driven 30HP electric motor. The fan and dust collector are rated at 9,500 cfm @17” WC. The fan is equipped with an outlet damper for regulating the airflow. The skid-mounted 9500 cfm dust collector has both lifting eyes and forklift pockets for handling by either crane or forklift. The legs are extendable so a standard 55 gallon dust barrel can be placed under the slide gate for easy emptying. The unit has (2) 18” diameter dust inlets on each of two sides to give the user greater versatility. Only two inlets are to be at a time. The dust collector utilizes twelve (12) filter cartridges which are cleaned by an automatic pulsing system. 30cfm of compressed air is required for the pulsing system. Dust Collector Spare Parts
Specifications: Manufacturer: SAFE Systems, Inc. Length 12' Width 8’ 0” Height 8’-6” (Shipping position) Height 11’-9” (Working position) Weight 7,300 lbs (New filters and dust hopper completely empty of dust) Horsepower 30 Voltage 460 VAC 3 phase Full load Amps 34.6 Features: Skid mounted. Extendable legs. Forklift pockets, located on 12' side of collector. Certified lifting eyes for handling by overhead crane. Fan and dust collector rated for 9,500 CFM @ 17” W.C. Four (4) dust inlets, 18” diameter, only two to be used at a time. Automatic reverse pulse cleaning system for filters. ¾” air piping for pulse cleaning system. Air requirements for pulse cleaning system, 30 CFM @ 90 to 100 PSIG. Fan is belt driven by a 30 HP, 460-volt, 3-phase electric motor. 460 volt AC control box. Twelve (12) cartridge filters, part #1000 0300 Adjustable inlet damper on the fan for regulating the airflow. Slide gate on the hopper dust discharge. Dust discharges in standard 55 gallon drum (drum to be supplied by customer). 25’ of properly sized SO cord for electrical hook-up. Notes: 1. Not intended to be shipped with any dust in collection hopper. 2. Recommend emptying dust every 2 to 4 hours depending on collection rate. 3. It is recommended that a qualified electrician connect this equipment to power. 4. Have electrician verify correct fan rotation after connection. 5. It is recommended that all new filters be coated with precoat dust prior to putting into service. 6. If operating this equipment using a generator, check with the generator provider to ensure proper sizing.We recommend at least a 75 KW generator for this piece of equipment. 7. We recommend shipping this piece of equipment on an open flat bed truck or trailer.Shipping in an enclosed box van or trailer is not recommended.