DC 12,500-E, Portable Electric Dust CollectorA compact and versatile dust collector, the SAFE Systems DC12,500E is powered by a belt-driven 50HP electric motor with a wye-delta starting system.
The fan and dust collector are rated at 12,500 cfm @ 20” WC. The fan is equipped with an inlet damper for regulating the airflow. The trailer-mounted 12,500 cfm dust collector is “highway legal” with pintle hitch, dual 7,000# axles, electric brakes and the required lights. It has lifting eyes for handling by crane, and can be loaded on a double-drop semi-trailer if needed. A large, container-style door makes filter access easy. The unit has two (2) 18” diameter dust inlets on each of two sides to give the user greater versatility. Only two inlets are to be used at a time. An auger system makes it easy to remove the dust from the hopper into a standard 55 gallon drum. The dust collector utilizes sixteen (16) filter cartridges which are cleaned by an automatic pulsing system. 30cfm of compressed air is required for the pulsing system. |
|
Specs:
Manufacturer: SAFE Systems, Inc.
Length 24’-4”
Width 8’-2”
Height 11’-3”
Weight 13,000 lbs. (New filters, dust hopper empty and ½ tank of diesel)
Pintle hitch height 22” to 26”
Horsepower 50 (460 volts, 3 phase, at 58.9 full load amps)
Filters 16
Features:
Highway legal trailer.
Dual 7,000 lb axles.
Electric brakes.
Fan and dust collector rated for 12,500 CFM @ 20” W.C.
Two (2) dust inlets, 18” diameter.
Automatic reverse pulse cleaning system for filters.
¾” air piping for pulse cleaning system.
Air requirements for pulse cleaning system, 30 CFM @ 90 to 100 PSIG.
Driven by a 50 HP electric motor with wye/delta soft start system.
25’ of #6, 4 conductor S.O. cord for connecting to job site power source.
12 VDC control box.
Sixteen (16) cartridge filters.
“On-board” flexible duct hose storage (store up to 100 feet).
Adjustable inlet damper on the fan for regulating the airflow.
Secure (lockable) engine and fuel tank compartment.
Ratchet take-up for easy belt tensioning.
Hand crank for auger to remove dust from collection hopper.
Dust discharges in standard 55 gallon drum (drum supplied by customer).
“On-board” lockable toolbox.
Notes:
1. Not intended to be towed with any dust in collection hopper.
2. Recommend emptying dust every 2 to 4 hours depending on collection rate.
3. It is recommended that all new filters be coated with pre-coat dust prior to putting into service.
4. Tow vehicle must be of sufficient size and weight to safely and legally tow the machine.
5. Tow vehicle must be equipped with a pintle style hitch.
6. Tow vehicle must be wired for towing.
7. Customer to provide matching plug and receptacle for the tow lighting.
8. Trip permit required for legally transporting on Washington State highways.
9. Have a qualified electrician hook up to proper power source.
Manufacturer: SAFE Systems, Inc.
Length 24’-4”
Width 8’-2”
Height 11’-3”
Weight 13,000 lbs. (New filters, dust hopper empty and ½ tank of diesel)
Pintle hitch height 22” to 26”
Horsepower 50 (460 volts, 3 phase, at 58.9 full load amps)
Filters 16
Features:
Highway legal trailer.
Dual 7,000 lb axles.
Electric brakes.
Fan and dust collector rated for 12,500 CFM @ 20” W.C.
Two (2) dust inlets, 18” diameter.
Automatic reverse pulse cleaning system for filters.
¾” air piping for pulse cleaning system.
Air requirements for pulse cleaning system, 30 CFM @ 90 to 100 PSIG.
Driven by a 50 HP electric motor with wye/delta soft start system.
25’ of #6, 4 conductor S.O. cord for connecting to job site power source.
12 VDC control box.
Sixteen (16) cartridge filters.
“On-board” flexible duct hose storage (store up to 100 feet).
Adjustable inlet damper on the fan for regulating the airflow.
Secure (lockable) engine and fuel tank compartment.
Ratchet take-up for easy belt tensioning.
Hand crank for auger to remove dust from collection hopper.
Dust discharges in standard 55 gallon drum (drum supplied by customer).
“On-board” lockable toolbox.
Notes:
1. Not intended to be towed with any dust in collection hopper.
2. Recommend emptying dust every 2 to 4 hours depending on collection rate.
3. It is recommended that all new filters be coated with pre-coat dust prior to putting into service.
4. Tow vehicle must be of sufficient size and weight to safely and legally tow the machine.
5. Tow vehicle must be equipped with a pintle style hitch.
6. Tow vehicle must be wired for towing.
7. Customer to provide matching plug and receptacle for the tow lighting.
8. Trip permit required for legally transporting on Washington State highways.
9. Have a qualified electrician hook up to proper power source.